Log Store Sides Complete
Here is the final side completed for the log store. The ranch boards are held apart by small blocks so there will be plenty air flow to allow the logs inside to dry out.
Month: February 2016
Slatted Sides for Wood Store
I want my wood store to have good airflow, but I also need to keep out the driving rain. So I opted for slatted sides. I’m using ranch boards – 150 x 20mm – and overlapping them slightly with a 20 mm spacer to provide space for airflow.
Pi Zero – Header Pins Soldered
I’m building a temperature sensor which updates a webpage, all being controlled from the Raspberry Pi Zero.
First thing is to solder some header pins on to the board, as the Zero comes “light”, so most functions need a little bit of work.
